
DM240XR High-Speed Digital Modulator Rear Panel Interfaces
MN-DM240XR– Revision 13 5–8
5.12.2 ASI Monitor
Incoming data from the active PIIC slot is output on this interface (Figure 5-1d), allowing the
customer to monitor the incoming data stream. The interface complies with DVB ASI Electrical
Specifications.
5.12.3 Parallel RS-422 Interface
This interface supports two terrestrial interface types and complies with RS-422 Electrical
Specifications (Figure 5.1f).
5.12.3.1 M2P (Parallel, RS-422)
M2P is supported on the DB-25 female connector. It complies with RS-422 Electrical
Specifications. Refer to Table 5-5 for pinouts for this connector. The maximum data rate is 238
Mbps.
Table 5-5. M2P RS-422 Parallel - 25-Pin Female
Pin No. Signal Name Direction
1 OUTCLK+ Output
14 OUTCLK- Output
2 CLK+ Input
15 CLK- Input
3 SYNC+ Input
16 SYNC- Input
4 VALID+ Input
17 VALID- Input
5 D0+ Input
18 D0- Input
6 D1+ Input
19 D1- Input
7 D2+ Input
20 D2- Input
8 D3+ Input
21 D3- Input
9 D4+ Input
22 D4- Input
10 D5+ Input
23 D5- Input
Comentários a estes Manuais