Radyne QAM256 Instruções de Operação Página 73
- Página / 87
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Remote Operations QAM256 Digital Video Modulator and Upconverter
C-18 TM077 – Rev. 4.0
<4> Symbol rate (Binary value, 1sps steps)
(This command will cause the carrier to turn off)
Opcode: <2244h> Command a modulator's modulation.
<1> Modulation (0=4 QAM, 1=16 QAM, 2=32 QAM, 3=64 QAM, 4=128 QAM,
5=256 QAM)
Opcode: <2245h> Command a modulator's spectrum.
<1> Spectrum (0=Normal, 1=Inverted)
Opcode: <2246h> Command a modulator's framing.
<1> Framing (0=MPEG 187, 1=MPEG 188, 2=MPEG 204, 3=Data)
Opcode: <2247h> Command a modulator's Interleaver and Encoder.
<1> Interleaver/Encoder (For Annex-A)
(0 = 1,204, 1 = 2,102, 2 = 3,68, 3 = 4,51, 4 = 6,34, 5 = 12,17, 6 =
17,12, 7 = 34,6, 8 = 51,4, 9 = 68,3, 10 = 102,2, 11 = 204,1)
(For Annex-B)
(12 = 128,1, 13 = 128,2, 14 = 64,2, 15 = 128,3, 16 = 32,4, 17 =
128,4, 18 = 16,8, 19 = 128,5, 20 = 8,16, 21 = 128,6, 22 = 4,32,
23 = 128,7, 24 = 2,64, 25 = 128,8, 26 = 1,128)
Opcode: <2249h> Command a modulator's roll off.
<1> Roll off (0=0.12, 1=0.15, 2=0.18)
Opcode: <224Ah> Command a modulator's interface type
<1> Interface Type (0 = STS1, 1 = G.703-E3, 2 = G.703-T3, 3 = Normal ASI, 4 =
Advanced ASI, 5 = DVB Parallel, 6 = M2P Parallel, 7 = ECL, 8 =
HSSI)
Opcode: <224Bh> Command a modulator's data polarity
<1> Data Polarity (0=Normal, 1=Inverted)
Opcode: <224Ch> Command a modulator's clock polarity
<1> Clock Polarity (0=Normal, 1=Inverted)
Opcode: <224Dh> Clear a modulator's Alarms.
<0> Clear Alarms (no parameters
Opcode: <224Eh> Mask a modulators Alarms.
<1> Major Alarm1 (Bit 0 = Mod Hardware)
(Bit 1 = Tx Synthesizer lock)
(Bit 2 = Data PLL lock)
(Bit 3 = Frame lock)
(Bit 4 = Mod1 lock)
(Bit 5 = Mod2 lock)
(Bit 6 = Mod3 lock)
(Bit 7 = Spare)
(0 = mask, 1 = allow)
<1> Major Alarm2 (Bit 0 = RF up synthesizer lock)
(Bit 1 = RF down synthesizer lock)
(Bit 2 = RF temperature Detect)
(Bit 3 = RF CPLD (hardware))
(Bit 4 = Spare)
(Bit 5 = Spare)
- Digital Video Modulator 1
- Warranty Policy 2
- Preface 4
- Table of Contents 6
- TM077 – Rev. 4.0 ix 8
- Introduction 10
- 1-2 TM077 - Rev. 4.0 11
- Installation 12
- 2.2 Removal and Assembly 13
- 2.3 Mounting Considerations 13
- TM077 – Rev. 4.0 2-3 14
- Theory of Operation 15
- 3-2 TM077 - Rev. 4.0 16
- User Interfaces 17
- 4.1.3 Numeric Keypad 18
- 4.2 Parameter Setup 19
- 4.3.1 Main Menus 20
- TM077 – Rev. 4.0 4-5 21
- 4-6 TM077 - Rev. 4.0 22
- TM077 – Rev. 4.0 4-7 23
- 4.5 Connecting the Terminal 24
- 4.6 Terminal Screens 24
- Main Menu Screen: 25
- 4-10 TM077 - Rev. 4.0 26
- TM077 – Rev. 4.0 4-11 27
- 4-12 TM077 - Rev. 4.0 28
- TM077 – Rev. 4.0 4-13 29
- 4-14 TM077 - Rev. 4.0 30
- TM077 – Rev. 4.0 4-15 31
- 4-16 TM077 - Rev. 4.0 32
- Rear Panel Interfaces 33
- 5.3 TX MON Port 34
- 5.4 TX IF Port 34
- TM077 – Rev. 4.0 5-3 35
- 5.5.1 TX PARALLEL Connector 36
- 5.5.2 REMOTE Connector 36
- 5.5.3 TX ASI Connector 36
- 5.8 Optional DVB Interface 37
- 5-6 TM077 - Rev. 4.0 38
- TM077 – Rev. 4.0 5-7 39
- 6.0 Periodic Maintenance 40
- 6-2 TM077 - Rev. 4.0 41
- Technical Specifications 42
- 7.2.1 RF Interface 43
- 7.2.2 Baseband Interface 43
- 7.2.3 Remote Interface 43
- 7.2.4 Physical 43
- TM077 – Rev. 4.0 7-3 44
- Product Options 45
- A-2 TM077 - Rev. 4.0 46
- SNMP MIB 47
- B-2 TM077 – Rev. 4.0 48
- TM077 – Rev. 4.0 B-3 49
- B-4 TM077 – Rev. 4.0 50
- TM077 – Rev. 4.0 B-5 51
- B-6 TM077 – Rev. 4.0 52
- TM077 – Rev. 4.0 B-7 53
- B-8 TM077 – Rev. 4.0 54
- TM077 – Rev. 4.0 B-9 55
- Remote Operations 56
- C.1.2 Protocol Wrapper 57
- TM077 – Rev. 4.0 C-3 58
- 02h = 00000010b 58
- C-4 TM077 – Rev. 4.0 59
- RESPONSE OPCODE DESCRIPTION 59
- Invalid Control Mode 59
- C.1.5 Collision Avoidance 60
- C.1.6 Software Compatibility 61
- C.1.8 RLLP Summary 62
- C-8 TM077 – Rev. 4.0 63
- TM077 – Rev. 4.0 C-9 64
- C-10 TM077 – Rev. 4.0 65
- TM077 – Rev. 4.0 C-11 66
- C-12 TM077 – Rev. 4.0 67
- TM077 – Rev. 4.0 C-13 68
- C-14 TM077 – Rev. 4.0 69
- TM077 – Rev. 4.0 C-15 70
- C-16 TM077 – Rev. 4.0 71
- TM077 – Rev. 4.0 C-17 72
- C-18 TM077 – Rev. 4.0 73
- TM077 – Rev. 4.0 C-19 74
- C-20 TM077 – Rev. 4.0 75
- TM077 – Rev. 4.0 C-21 76
- C-22 TM077 – Rev. 4.0 77
- TM077 – Rev. 4.0 C-23 78
- C-24 TM077 – Rev. 4.0 79
- TM077 – Rev. 4.0 C-25 80
- C-26 TM077 – Rev. 4.0 81
- Glossary 82
- G-2 TM077 – Rev. 4.0 83
- TM077 – Rev. 4.0 84
- G-4 TM077 – Rev. 4.0 85
- G-6 TM077 – Rev. 4.0 87
Manuais e produtos relacionados com Modulador Radyne QAM256
Modulador Radyne DMDVB20 LBST Instruções de Operação
(113 páginas)
(113 páginas)
Modulador Radyne DM240XR Especificações
(196 páginas)
(196 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 1.797 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais