
Maintenance and Troubleshooting DMDVB20 LBST Satellite Modem
6-2 TM138 – Rev. 1.0
Symptom Possible Cause
There is an improper receive input to modem.
The Receive Carrier Level is too low.
The Receive Carrier Frequency is outside of the acquisition
range.
The Transmit Carrier is incompatible.
The Modem will not acquire the
incoming carrier:
Modem is in Test Mode.
6.1.1 Alarm Faults
6.1.1.1 Major Tx Alarms
Alarm Possible Cause
FPGA CFG Indicates a transmit FPGA hardware failure.
DSP CFG Indicates a transmit FPGA failure.
SCT Clock PLL Indicates that the Tx SCT Clock PLL is not locked. This
alarm will flash on during certain modem parameter
changes. A solid indication points toward a configuration
problem within the modem.
SYM Clock PLL
Indicates that the Tx Symbol Clock PLL is not locked. This
alarm will flash on during certain modem parameter
changes. A solid indication points toward a problem with the
incoming clock to the modem (SCTE).
LB Synth PLL Indicates that the Tx L-Band Synthesizer is not locked. This
alarm will flash on during certain modem parameter
changes. A solid indication points toward a configuration
problem within the modem.
Comentários a estes Manuais